1. NAME▲

enum_mac80211_rate_control_flags - per-rate flags set by the Rate Control algorithm.

2. SYNOPSIS ▲



 
Sélectionnez
enum mac80211_rate_control_flags {
  IEEE80211_TX_RC_USE_RTS_CTS,
  IEEE80211_TX_RC_USE_CTS_PROTECT,
  IEEE80211_TX_RC_USE_SHORT_PREAMBLE,
  IEEE80211_TX_RC_MCS,
  IEEE80211_TX_RC_GREEN_FIELD,
  IEEE80211_TX_RC_40_MHZ_WIDTH,
  IEEE80211_TX_RC_DUP_DATA,
  IEEE80211_TX_RC_SHORT_GI,
  IEEE80211_TX_RC_VHT_MCS,
  IEEE80211_TX_RC_80_MHZ_WIDTH,
  IEEE80211_TX_RC_160_MHZ_WIDTH
};

3. CONSTANTS ▲

IEEE80211_TX_RC_USE_RTS_CTS
    Use RTS/CTS exchange for this rate.

IEEE80211_TX_RC_USE_CTS_PROTECT
    CTS-to-self protection is required. This is set if the current BSS requires ERP protection.

IEEE80211_TX_RC_USE_SHORT_PREAMBLE
    Use short preamble.

IEEE80211_TX_RC_MCS
    HT rate.

IEEE80211_TX_RC_GREEN_FIELD
    Indicates whether this rate should be used in Greenfield mode.

IEEE80211_TX_RC_40_MHZ_WIDTH
    Indicates if the Channel Width should be 40 MHz.

IEEE80211_TX_RC_DUP_DATA
    The frame should be transmitted on both of the adjacent 20 MHz channels, if the current channel type is NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.

IEEE80211_TX_RC_SHORT_GI
    Short Guard interval should be used for this rate.

IEEE80211_TX_RC_VHT_MCS
    VHT MCS rate, in this case the idx field is split into a higher 4 bits (Nss) and lower 4 bits (MCS number)

IEEE80211_TX_RC_80_MHZ_WIDTH
    Indicates 80 MHz transmission

IEEE80211_TX_RC_160_MHZ_WIDTH
    Indicates 160 MHz transmission (80+80 isnAqt supported yet)

4. DESCRIPTION ▲

These flags are set by the Rate control algorithm for each rate during tx, in the flags member of struct ieee80211_tx_rate.

5. AUTHOR ▲

Johannes Berg <>
    Author.

6. COPYRIGHT ▲