Man page 3 : XkbGetKeyboardByName

XkbGetKeyboardByName - Build a new keyboard description from a set of named components, and to optionally have the server use the resulting description to replace an active one

XkbDescPtr XkbGetKeyboardByName (Display * dpy , unsigned int device_spec , XkbComponentNamesPtr names , unsigned int want , unsigned int need , Bool load );

• - dpy
      connection to X server
• - device_spec
      device ID, or XkbUseCoreKbd
• - names
      names of components to fetch
• - want
      desired structures in returned record
• - need
      mandatory structures in returned record
• - load
      True => load into device_spec

A client may request that the server fetch one or more components from its database and use those components to build a new server keyboard description. The new keyboard description may be built from scratch, or it may be built starting with the current keyboard description for a particular device. Once the keyboard description is built, all or part of it may be returned to the client. The parts returned to the client need not include all of the parts used to build the description. At the time it requests the server to build a new keyboard description, a client may also request that the server use the new description internally to replace the current keyboard description for a specific device, in which case the behavior of the device changes accordingly. To build a new keyboard description from a set of named components, and to optionally have the server use the resulting description to replace an active one, use XkbGetKeyboardByName. namescontains a set of expressions describing the keyboard components the server should use to build the new keyboard description. wantand needare bit fields describing the parts of the resulting keyboard description that should be present in the returned XkbDescRec. The individual fields in namesare component expressionscomposed of keyboard component names (no wildcarding as may be used in XkbListComponents),the special component name symbol `%', and the special operator characters `+' and `|'. A component expression is parsed left to right, as follows:

5 The special component name "computed" may be used in keycodes component expressions and refers to a component consisting of a set of keycodes computed automatically by the server as needed.

5 The special component name "canonical" may be used in types component expressions and refers to a partial component defining the four standard key types: ALPHABETIC, ONE_LEVEL, TWO_LEVEL, and KEYPAD.

5 The special component name `%' refers to the keyboard description for the device specified in device_spec or the keymap names component. If a keymap names component is specified that does not begin with `+' or `|' and does not contain `%', then `%' refers to the description generated by the keymap names component. Otherwise, it refers to the keyboard description for device_spec.

5 The `+' operator specifies that the following component should override the currently assembled description; any definitions that are present in both components are taken from the second.

5 The `|' operator specifies that the next specified component should augment the currently assembled description; any definitions that are present in both components are taken from the first.

5 If the component expression begins with an operator, a leading `%' is implied.

5 If any unknown or illegal characters appear anywhere in the expression, the entire expression is invalid and is ignored. For example, if names->symbolscontained the expression "+de", it specifies that the default member of the "de" class of symbols should be applied to the current keyboard mapping, overriding any existing definitions (it could also be written "+de(default)"). Here is a slightly more involved example: the expression "acme(ascii)+de(basic)|iso9995-3" constructs a German (de) mapping for the ASCII keyboard supplied by the "acme" vendor. The new definition begins with the symbols for the ASCII keyboard for Acme (acme(ascii)),overrides them with definitions for the basic German keyboard (de(basic)),and then applies the definitions from the default iso9995-3 keyboard (iso9995-3)to any undefined keys or groups of keys (part three of the iso9995 standard defines a common set of bindings for the secondary group, but allows national layouts to override those definitions where necessary).

NOTE The interpretation of the above expression components (acme, ascii, de, basic, iso9995-3) is not defined by Xkb; only the operations and their ordering are. Note that the presence of a keymap namescomponent that does not contain `%' (either explicit or implied by virtue of an expression starting with an operator) indicates a description that is independent of the keyboard description for the device specified in device_spec.The same is true of requests in which the keymap names component is empty and all five other names components contain expressions void of references to `%'. Requests of this form allow you to deal with keyboard definitions independent of any actual device. The server parses all non-NULL fields in namesand uses them to build a keyboard description. However, before parsing the expressions in names,the server ORs the bits in wantand needtogether and examines the result in relationship to the expressions in names.Table 1 identifies the components that are required for each of the possible bits in wantor need.If a required component has not been specified in the names structure (the corresponding field is NULL), the server substitutes theexpression "%", resulting in the component values being taken from device_spec.In addition, if loadis True, the server modifies namesif necessary (again using a "%" entry) to ensure all of the following fields are non-NULL: types, keycodes, symbols,and compat.

needspecifies a set of keyboard components that the server must be able to resolve in order for XkbGetKeyboardByNameto succeed; if any of the components specified in needcannot be successfully resolved, XkbGetKeyboardByNamefails. wantspecifies a set of keyboard components that the server should attempt to resolve, but that are not mandatory. If the server is unable to resolve any of these components, XkbGetKeyboardByNamestill succeeds. Bits specified in wantthat are also specified in needhave no effect in the context of want. If loadis True, the server updates its keyboard description for device_specto match the result of the keyboard description just built. If load is False, the server's description for device device_specis not updated. In all cases, the parts specified by wantand needfrom the just-built keyboard description are returned. The namesstructure in an XkbDescRec keyboard description record contains one field for each of the five component types used to build a keyboard description. When a keyboard description is built from a set of database components, the corresponding fields in this namesstructure are set to match the expressions used to build the component. Building a New Keyboard Description from the Server Database The information returned to the client in the XkbDescRec is essentially the result of a series of calls to extract information from a fictitious device whose description matches the one just built. The calls corresponding to each of the mask bits are summarized in Table 2, together with the XkbDescRec components that are filled in.

There is no way to determine which components specified in want(but not in need)were actually fetched, other than breaking the call into successive calls to XkbGetKeyboardByNameand specifying individual components. XkbGetKeyboardByNamealways sets min_key_codeand max_key_codein the returned XkbDescRec structure. XkbGetKeyboardByNameis synchronous; it sends the request to the server to build a new keyboard description and waits for the reply. If successful, the return value is non-NULL. XkbGetKeyboardByNamegenerates a BadMatch protocol error if errors are encountered when building the keyboard description.

The complete description of an Xkb keyboard is given by an XkbDescRec. The component structures in the XkbDescRec represent the major Xkb components outlined in Figure 1.1.

typedef struct {
   struct _XDisplay * display;      /(** connection to X server */
   unsigned short     flags;        /(** private to Xkb, do not modify */
   unsigned short     device_spec;  /(** device of interest */
   KeyCode            min_key_code; /(** minimum keycode for device */
   KeyCode            max_key_code; /(** maximum keycode for device */
   XkbControlsPtr     ctrls;        /(** controls */
   XkbServerMapPtr    server;       /(** server keymap */
   XkbClientMapPtr    map;          /(** client keymap */
   XkbIndicatorPtr    indicators;   /(** indicator map */
   XkbNamesPtr        names;        /(** names for all components */
   XkbCompatMapPtr    compat;       /(** compatibility map */
   XkbGeometryPtr     geom;         /(** physical geometry of keyboard */
} XkbDescRec, *XkbDescPtr;

The displayfield points to an X display structure. The flags field is private to the library: modifyingflagsmay yield unpredictable results. The device_specfield specifies the device identifier of the keyboard input device, or XkbUseCoreKeyboard, which specifies the core keyboard device. The min_key_codeand max_key_codefields specify the least and greatest keycode that can be returned by the keyboard. Each structure component has a corresponding mask bit that is used in function calls to indicate that the structure should be manipulated in some manner, such as allocating it or freeing it. These masks and their relationships to the fields in the XkbDescRec are shown in Table 3.

BadMatch

               A compatible version of Xkb was not available in the server or an argument has correct type and range, but is otherwise invalid

R XkbListComponents (3)