Man page 1 : python2.6

python - an interpreted, interactive, object-oriented programming language

python [

-B ] [

-d ] [

-E ] [

-h ] [

-i ] [

-m module-name]
[

-O ] [

-O0 ] [

-Q argument] [

-s ] [

-S ] [

-t ] [

-u ]
[

-v ] [

-V ] [

-W argument] [

-x ] [

-3 ] [

-? ]
[

-c command| script| - ] [ arguments]

Python is an interpreted, interactive, object-oriented programming language that combines remarkable power with very clear syntax. For an introduction to programming in Python you are referred to the Python Tutorial. The Python Library Reference documents built-in and standard types, constants, functions and modules. Finally, the Python Reference Manual describes the syntax and semantics of the core language in (perhaps too) much detail. (These documents may be located via the

INTERNET RESOURCES below; they may be installed on your system as well.)

Python's basic power can be extended with your own modules written in C or C++. On most systems such modules may be dynamically loaded. Python is also adaptable as an extension language for existing applications. See the internal documentation for hints.

Documentation for installed Python modules and packages can be viewed by running the

pydoc program.

-B
    Don't write .py[co]files on import. See also PYTHONDONTWRITEBYTECODE.

• -c command
      Specify the command to execute (see next section). This terminates the option list (following options are passed as arguments to the command).

-d
    Turn on parser debugging output (for wizards only, depending on compilation options).

-E
    Ignore environment variables like PYTHONPATH and PYTHONHOME that modify the behavior of the interpreter.

-h
    Prints the usage for the interpreter executable and exits.

-i
    When a script is passed as first argument or the -c option is used, enter interactive mode after executing the script or the command. It does not read the $PYTHONSTARTUP file. This can be useful to inspect global variables or a stack trace when a script raises an exception.

• -m module-name
      Searches sys.pathfor the named module and runs the corresponding .pyfile as a script.

-O
    Turn on basic optimizations. This changes the filename extension for compiled (bytecode) files from .pycto .pyo. Given twice, causes docstrings to be discarded.

-O0
    Discard docstrings in addition to the -O optimizations.

• -Q argument
      Division control; see PEP 238. The argument must be one of "old" (the default, int/int and long/long return an int or long), "new" (new division semantics, i.e. int/int and long/long returns a float), "warn" (old division semantics with a warning for int/int and long/long), or "warnall" (old division semantics with a warning for all use of the division operator). For a use of "warnall", see the Tools/scripts/fixdiv.py script.

-s
    Don't add user site directory to sys.path.

-S
    Disable the import of the module siteand the site-dependent manipulations of sys.paththat it entails.

-t
    Issue a warning when a source file mixes tabs and spaces for indentation in a way that makes it depend on the worth of a tab expressed in spaces. Issue an error when the option is given twice.

-u
    Force stdin, stdout and stderr to be totally unbuffered. On systems where it matters, also put stdin, stdout and stderr in binary mode. Note that there is internal buffering in xreadlines(), readlines() and file-object iterators ("for line in sys.stdin") which is not influenced by this option. To work around this, you will want to use "sys.stdin.readline()" inside a "while 1:" loop.

-v
    Print a message each time a module is initialized, showing the place (filename or built-in module) from which it is loaded. When given twice, print a message for each file that is checked for when searching for a module. Also provides information on module cleanup at exit.

-V
    Prints the Python version number of the executable and exits.

• -W argument
      Warning control. Python sometimes prints warning message to sys.stderr . A typical warning message has the following form: .IB file ":" line ": " category ": " message. By default, each warning is printed once for each source line where it occurs. This option controls how often warnings are printed. Multiple

-W options may be given; when a warning matches more than one option, the action for the last matching option is performed. Invalid

-W options are ignored (a warning message is printed about invalid options when the first warning is issued). Warnings can also be controlled from within a Python program using the warningsmodule. The simplest form of argumentis one of the following actionstrings (or a unique abbreviation):

ignore to ignore all warnings;

default to explicitly request the default behavior (printing each warning once per source line);

all to print a warning each time it occurs (this may generate many messages if a warning is triggered repeatedly for the same source line, such as inside a loop);

module to print each warning only the first time it occurs in each module;

once to print each warning only the first time it occurs in the program; or

error to raise an exception instead of printing a warning message. The full form of argumentis .IB action : message : category : module : line. Here, actionis as explained above but only applies to messages that match the remaining fields. Empty fields match all values; trailing empty fields may be omitted. The messagefield matches the start of the warning message printed; this match is case-insensitive. The categoryfield matches the warning category. This must be a class name; the match test whether the actual warning category of the message is a subclass of the specified warning category. The full class name must be given. The modulefield matches the (fully-qualified) module name; this match is case-sensitive. The linefield matches the line number, where zero matches all line numbers and is thus equivalent to an omitted line number.

-x
    Skip the first line of the source. This is intended for a DOS specific hack only. Warning: the line numbers in error messages will be off by one!

-3
    Warn about Python 3.x incompatibilities that 2to3 cannot trivially fix.

The interpreter interface resembles that of the UNIX shell: when called with standard input connected to a tty device, it prompts for commands and executes them until an EOF is read; when called with a file name argument or with a file as standard input, it reads and executes a scriptfrom that file; when called with

-c command,it executes the Python statement(s) given as command.Here commandmay contain multiple statements separated by newlines. Leading whitespace is significant in Python statements! In non-interactive mode, the entire input is parsed before it is executed.

If available, the script name and additional arguments thereafter are passed to the script in the Python variable sys.argv ,which is a list of strings (you must first import systo be able to access it). If no script name is given, sys.argv[0]is an empty string; if

-c is used, sys.argv[0]contains the string '-c'.Note that options interpreted by the Python interpreter itself are not placed in sys.argv.

In interactive mode, the primary prompt is `>>>'; the second prompt (which appears when a command is not complete) is `...'. The prompts can be changed by assignment to sys.ps1or sys.ps2.The interpreter quits when it reads an EOF at a prompt. When an unhandled exception occurs, a stack trace is printed and control returns to the primary prompt; in non-interactive mode, the interpreter exits after printing the stack trace. The interrupt signal raises the KeyboardInterruptexception; other UNIX signals are not caught (except that SIGPIPE is sometimes ignored, in favor of the IOErrorexception). Error messages are written to stderr.

These are subject to difference depending on local installation conventions; ${prefix} and ${exec_prefix} are installation-dependent and should be interpreted as for GNU software; they may be the same. On Debian GNU/{Hurd,Linux} the default for both is /usr.

${exec_prefix}/bin/python Recommended location of the interpreter.

${prefix}/lib/python<version>
${exec_prefix}/lib/python<version>Recommended locations of the directories containing the standard modules.

${prefix}/include/python<version>
${exec_prefix}/include/python<version>Recommended locations of the directories containing the include files needed for developing Python extensions and embedding the interpreter.

~/.pythonrc.py User-specific initialization file loaded by the user module; not used by default or by most applications.

PYTHONHOME Change the location of the standard Python libraries. By default, the libraries are searched in ${prefix}/lib/python<version> and ${exec_prefix}/lib/python<version>, where ${prefix} and ${exec_prefix} are installation-dependent directories, both defaulting to /usr/local. When $PYTHONHOME is set to a single directory, its value replaces both ${prefix} and ${exec_prefix}. To specify different values for these, set $PYTHONHOME to ${prefix}:${exec_prefix}.

PYTHONPATH Augments the default search path for module files. The format is the same as the shell's $PATH: one or more directory pathnames separated by colons. Non-existent directories are silently ignored. The default search path is installation dependent, but generally begins with ${prefix}/lib/python<version> (see PYTHONHOME above). The default search path is always appended to $PYTHONPATH. If a script argument is given, the directory containing the script is inserted in the path in front of $PYTHONPATH. The search path can be manipulated from within a Python program as the variable sys.path .

PYTHONSTARTUP If this is the name of a readable file, the Python commands in that file are executed before the first prompt is displayed in interactive mode. The file is executed in the same name space where interactive commands are executed so that objects defined or imported in it can be used without qualification in the interactive session. You can also change the prompts sys.ps1and sys.ps2in this file.

PYTHONY2K Set this to a non-empty string to cause the time module to require dates specified as strings to include 4-digit years, otherwise 2-digit years are converted based on rules described in the time module documentation.

PYTHONOPTIMIZE If this is set to a non-empty string it is equivalent to specifying the -O option. If set to an integer, it is equivalent to specifying -O multiple times.

PYTHONDEBUG If this is set to a non-empty string it is equivalent to specifying the -d option. If set to an integer, it is equivalent to specifying -d multiple times.

PYTHONDONTWRITEBYTECODE If this is set to a non-empty string it is equivalent to specifying the -B option (don't try to write .py[co]files).

PYTHONINSPECT If this is set to a non-empty string it is equivalent to specifying the -i option.

PYTHONNOUSERSITE If this is set to a non-empty string it is equivalent to specifying the -s option (Don't add the user site directory to sys.path).

PYTHONUNBUFFERED If this is set to a non-empty string it is equivalent to specifying the -u option.

PYTHONVERBOSE If this is set to a non-empty string it is equivalent to specifying the -v option. If set to an integer, it is equivalent to specifying -v multiple times.

The Python Software Foundation: http://www.python.org/psf

Main website: http://www.python.org/
Documentation: http://docs.python.org/
Developer resources: http://www.python.org/dev/
Downloads: http://python.org/download/
Module repository: http://pypi.python.org/
Newsgroups: comp.lang.python, comp.lang.python.announce

Python is distributed under an Open Source license. See the file "LICENSE" in the Python source distribution for information on terms & conditions for accessing and otherwise using Python and for a DISCLAIMER OF ALL WARRANTIES.