1. NAME

enum_ieee80211_channel_flags - channel flags

2. SYNOPSIS



 
Sélectionnez
enum ieee80211_channel_flags {
  IEEE80211_CHAN_DISABLED,
  IEEE80211_CHAN_PASSIVE_SCAN,
  IEEE80211_CHAN_NO_IBSS,
  IEEE80211_CHAN_RADAR,
  IEEE80211_CHAN_NO_HT40PLUS,
  IEEE80211_CHAN_NO_HT40MINUS,
  IEEE80211_CHAN_NO_OFDM,
  IEEE80211_CHAN_NO_80MHZ,
  IEEE80211_CHAN_NO_160MHZ
};

3. CONSTANTS

IEEE80211_CHAN_DISABLED
    This channel is disabled.

IEEE80211_CHAN_PASSIVE_SCAN
    Only passive scanning is permitted on this channel.

IEEE80211_CHAN_NO_IBSS
    IBSS is not allowed on this channel.

IEEE80211_CHAN_RADAR
    Radar detection is required on this channel.

IEEE80211_CHAN_NO_HT40PLUS
    extension channel above this channel is not permitted.

IEEE80211_CHAN_NO_HT40MINUS
    extension channel below this channel is not permitted.

IEEE80211_CHAN_NO_OFDM
    OFDM is not allowed on this channel.

IEEE80211_CHAN_NO_80MHZ
    If the driver supports 80 MHz on the band, this flag indicates that an 80 MHz channel cannot use this channel as the control or any of the secondary channels. This may be due to the driver or due to regulatory bandwidth restrictions.

IEEE80211_CHAN_NO_160MHZ
    If the driver supports 160 MHz on the band, this flag indicates that an 160 MHz channel cannot use this channel as the control or any of the secondary channels. This may be due to the driver or due to regulatory bandwidth restrictions.

4. DESCRIPTION

Channel flags set by the regulatory control code.

5. AUTHOR

Johannes Berg < >
    Author.

6. COPYRIGHT