1. NAME

foo2zjs - Convert Ghostscript pbmraw or bitcmyk format into a ZJS printer stream

2. SYNOPSIS

foo2zjs [ options "] <" pbmraw-file " >" zjs-file

foo2zjs [ options "] <" bitcmyk-file " >" zjs-file

foo2zjs [ options "] <" pksmraw-file " >" zjs-file

3. DESCRIPTION

foo2zjs converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or color ZJS streams, for driving the Minolta/QMS 2300 DL network color laser printer and other Zenographics-based printers.

4. COMMAND LINE OPTIONS

4.1. Normal Options

These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

  • -c
        Force color mode if autodetect doesn't work.
  • -d\0 duplex
        Duplex code to send to printer [1].
  • -g\0 xpix x ypix
        Set page dimensions in pixels [10200x6600].
  • -m\0 media
        Media code to send to printer [1].
  • -p\0 paper
        Paper code to send to printer [1].
  • -n\0 copies
        Number of copies [1].
  • -r\0 xres x yres
        Set device resolution in pixels/inch [1200x600].
  • -s\0 source
        Source (InputSlot) code to send to printer [7].
  • -t
        Draft mode. Every other pixel is white.
  • -J\0 filename
        Filename string to send to printer.
  • -U\0 username
        Username string to send to printer.
| n l | n l | n l .
1 off 2 long edge 3 short edge
l l l
l n n.
_
Media 2300DL 2200DL
_
standard 1 1
transparency 2 2
envelope 257 na
letterhead 259 na
thick 261 4
postcard 262 na
labels 263 3
box;
| n l | n l.
1 letter 9 A4
5 legal 11 A5
7 executive 13 B5
20 env #10 27 env DL
28 env C5 34 env B5
37 env Monarch
| n l | n l.
1 upper 4 manual
2 lower 7 auto

4.2. Printer Tweaking Options

These are the options used to customize the operation of foo2zjs for a particular printer.

  • -u\0 xoff x yoff
        Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
  • -l\0 xoff x yoff
        Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
  • -L\0 mask
        Send logical clipping amounts implied by -u/-l in the ZjStream [3].
  • -P
        Do not send START_PLANE codes on monochrome output. May be needed by some black and white only printers, such as the HP LaserJet 1000.
  • -A
        AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
  • -B
        BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
  • -X\0 padlen
        Add extra zero padding to the end of BID segments. The default is 16 bytes. Padding 16 bytes of zeroes is needed for older ZjStream printers, such as the Minolta 2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as the Minolta 2300DL. So the default should be good for all cases.
  • -z\0 model
        Model: 0=2300DL, 1=HP1020. Default is 0.
0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts

4.3. Debugging Options

These options are used for debugging foo2zjs.

  • -S\0 plane
        Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes.
  • -D\0 level
        Set Debug level [0].
1 Cyan
2 Magenta
3 Yellow
4 Black

5. EXAMPLES

Create a black and white ZJS stream:

 
Sélectionnez
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
    -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
    -sOutputFile=- - < testpage.ps
| foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zm

Create a color ZJS stream:

 
Sélectionnez
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
    -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
    -sOutputFile=- - < testpage.ps
| foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zc

6. FILES

R /usr/bin/foo2zjs

7. SEE ALSO

R foo2zjs-wrapper (1),

R zjsdecode (1)

8. AUTHOR

Rick Richardson < >
http://foo2zjs.rkkda.com/ .em pdf_outline