1. NAME

foo2oak-wrapper - Convert Postscript into an OAKT printer stream

2. SYNOPSIS

foo2oak-wrapper [ options "] [" ps-file ]

3. DESCRIPTION

foo2oak-wrapper is a Foomatic compatible printer wrapper for the foo2oak printer driver. This script reads a Postscript ps-file or standard input and converts it to Oak Technology OAKT printer format for driving the HP Color LaserJet 1500 laser printer, Kyocera KM-1636/KM-2035 copiers, and other OAKT-based printers.

This script can be used in a standalone fashion, but is intended to be called from a printer spooler system which uses the Foomatic printer database.

4. COMMAND LINE OPTIONS

4.1. Normal Options

These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

  • -b\0 bits
        Number of bits per plane (1 or 2) [1].
  • -c
        Print in color (else monochrome).
  • -m\0 media
        Media code to send to printer [1].
  • -p\0 paper
        Paper size code to send to printer [1].
  • -n\0 copies
        Number of copies [1].
  • -r\0 xres x yres
        Set device resolution in pixels/inch [600x600].
  • -s\0 source
        Source (Input Slot) code to send to printer [7].
  • -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
        Print in N-up. Requires the psutils package.
  • -o\0 orient
        Orientation used for N-up.
l l l
l n n.
_
Media HP CLJ 1500 KM-1635
-z0 -z1
_
autoselect 0 0
plain 1 1
preprinted 2 2
letterhead 3 3
transparency 4 4
prepunched 5 5
labels 6 6
bond 7 7
recycled 8 8
color 9 9
cardstock 10 10
envelope 11 11
light 13 na
tough 14 na
vellum na 15
rough na 16
thick na 19
highqual na 20
box;
| n l | n l.
1 letter 3 ledger
5 legal 6 statement
7 executive 8 A3
9 A4 11 A5
12 B4 13 B5jis
14 folio 19 env9
20 env10 27 envDL
28 envC5 30 envC4
37 envMonarch 257 A6
258 B6 259 B5iso
260 env6
| n l | n l.
1 upper 4 manual
7 auto
Portrait -op (normal)
Landscape -ol (rotated 90 degrees anticlockwise)
Seascape -os (rotated 90 degrees clockwise)

4.2. Printer Tweaking Options

These are the options used to customize the operation of foo2oak for a particular printer.

  • -u\0 xoff x yoff
        Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
  • -l\0 xoff x yoff
        Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
  • -L\0 mask
        Send the logical clipping values from -u/-l in the OAKT stream. foo2oak-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer has unprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases.
  • -z\0 model
        Model is 0 for the HP Color LaserJet 1500, and 1 for the Kyocera KM-1635/KM-2035 copiers. The default is 0.
0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts

4.3. Color Tweaking Options

These are the options used to control the quality of color output. Color correction is currently a WORK IN PROGRESS.

  • -g\0 gsopts
        Additional options to pass to Ghostscript, such as -g« -dDITHERPPI=nnn », etc. This option may appear more than once.
  • -G\0 profile.icm
        Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-icc2ps and adjust the printer colors by using the Postscript setcolorrendering operator. (WORK IN PROGRESS).
  • -G\0 gamma-file.ps
        Prepend gamma-file.ps to the Postscript input to perform color correction using the setcolortransfer Postscript operator. For example, the file might contain:
    {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
  • -I\0 intent
        Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute. Default is 0 (perceptual).

4.4. Debugging Options

These options are used for debugging foo2oak and its wrapper.

  • -S\0 plane
        Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes.
  • -D\0 level
        Set Debug level [0].
1 Cyan
2 Magenta
3 Yellow
4 Black

5. EXAMPLES

Create a monochrome OAKT stream from a Postscript document, examine it, and then print it using a RAW print queue:

 
Sélectionnez
foo2oak-wrapper testpage.ps > testpage.oak
oakdecode < testpage.oak
lpr -P raw testpage.oak

Create a color OAKT stream from a Postscript document:

 
Sélectionnez
foo2oak-wrapper -c testpage.ps > testpage.oak

6. FILES

R /usr/bin/foo2oak-wrapper

7. SEE ALSO

R foo2oak (1),

R oak (1)

8. AUTHOR

Rick Richardson <>
http://foo2oak.rkkda.com/ .em pdf_outline